Custom
Printed 327th Star Corps Clone Trooper Pauldron
Will fit a standard Lego minifigure.
Pair with our Dark Tan kama or V Front kama to complete the look.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
Also available as a complete set (4x pauldrons with 4x Dark Tan V Front kama for 4x 327th Star Corps)
8 capes for your 327th Star Corps Clone Trooper minifigs:
4x Printed Custom 327th Star Corps Pauldrons
4x Dark Tan V Front Kamas
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
Will fit a standard LEGO minifigure.
Also sold separately. 
4 Printed 501st Double Pauldrons and 4 501st Printed Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
Printed Double Sided 501st Pauldrons (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed kamas.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
Printed 501st Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed double pauldrons.
Please note these kamas are designed to wrap further around the minifigure's legs to ensure the decal print is covered. Our other printed trim kamas (including blue trim) do not wrap around as far.
Will fit a standard Lego minifigure.
Made from polycotton.
Available in dark grey (to match sw1300) and light grey (to match white Ahsoka minifig- sw1354).
For video instructions for help putting on this cape please click here
Made from polycotton. Will fit a standard minifigure.
Made from polycotton. Compatible with Lego minifigures with standard legs.
Colour pictured: Black
One side is suede and the other is polycotton. Will fit a minifigure with standard legs. Pocket and button feature on the inside of the coat.
Bane trench pictured is dark tan.
Our Batman Bachelor cape has white suedette on one side and plain silver on the other. Will fit a minifigure with standard legs.
Made from polycotton. Will fit a minifigure with standard legs.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Upgrade your Cal Kestis minifigure with our new custom printed Cal Kestis poncho.
Printed Palpatine Robe. Printed design on the front all red on the other side. Will fit a standard Lego minifigure. Ideal for the Lego Starwars Palpatine minifigure
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Made from polyester. Designed to fit over a clone helmet. Ideal for custom figures eg. Commander Keller.
Video instructions for application coming soon.
Upgrade your Commander Bacara minifig with our Bacara Pauldron (Cherry Red). Pair with our V Front Kama (Cherry Red) to complete the look.
Made from polycotton. Will fit a standard LEGO minifigure.
Included in this set:
Mind Flayer - 3e
Mind Flayer - 5e
Mind Flayer - Emperor set of 3 printed
Strahd - Cherry Red/Black version
Strahd - Dark Blue version
Halfling Druid - Short leg version
Halfling Druid - Standard leg length version
Lady of Pain
Teifling
Dragonborn Paladin
Tasha printed cape
Szass cape and cowl
We have designed a range of capes to enhance your Minecraft minifigs.
Total set worth £11.78 (when purchased individually)
CAPES ONLY. Minifigs NOT included.
Included in this set:
1x Migrator Printed Cape
1x Creeper (MineCon 2011) Printed Cape
1x Pair of Printed Elytra Wings
1x Shouldered Stray Printed Cape
1x Stray (no shoulders) Printed Cape
2x Stray (unprinted) Capes
Custom Minecraft Creeper (MineCon 2011) printed cape
Upgrade your Darth Vader minifig with our custom 5 hole cloak and longer v-front style kama.
Available in black and white.
Will fit a minifigure with standard legs. Made from polycotton. 
Upgrade your D&D Red Dragon’s Tale with our custom printed wings (sold as a pair).
PLEASE NOTE: This cape is the same as our Knight Armour cape. We have listed the cape under different names to assist different customers in finding this armour shoulder pad compatible design.
Designed to fit around the character's shoulder pieces.
Choose from our selection of cape designs which are yellow with a black reverse.
These capes will fit your Lego standard leg minifigure. If there is a cape design that you would like but it is not listed here, please do get in touch.
The kama design has been adapted to ensure full coverage over the printed kama on your Bad Batch Minifig.
Designed to worn with our overshoulder plain cape to give a fur collar effect (please note the overshoulder plain cape is SOLD SEPARATELY and is not included with the purchase of a fur collar).
See how some of our polycotton colours look with our fur collar colour options below:
Made from suedette. Will fit a Lego minifigure.
Upgrade your Gambit minifigure with our custom trench coat.
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.
NEW & IMPROVED Large Grievous Cape for your Buildable LEGO Grievous
Featuring
- Softer fabric- allowing the cape to fall freely over the figure
- Longer- covers more of the back of the figure than our previous design
Only 1 per customer. If you would like to order more 2+ please email us at sales@capes4minifigs.com
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.
Made from polycotton. Will fit a standard minifigure. Goes well with standard capes as shown on the Lego model.
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment.
Made from polycotton. Skirt with the same cut and shape as our kilts but just in plain polycotton fabric. Will fit a minifigure with standard legs.
Will fit a standard Lego minifigure.
Please note they are cut from patterned printed fabric so each collar will be different.
Made from polycotton. Will fit a minifigure with standard legs.
PLEASE NOTE: This cape is the same as our Dragonborn cape. We have listed the cape under different names to assist different customers in finding this armour shoulder pad compatible design.
Printed coloured Lando Cape. Colour shape on black one side and all black on the other side. Will fit a standard Lego minifigure. Ideal replacement for Lego Starwars Lando minifigure
Printed patterned Lando cape. Gold pattern on one side and medium blue on the other. Ideal upgrade for your Lando minifig.
Made from polycotton. Will fit a standard minifigure.
Long awaited cape design - we have managed to create a hood which fits over a figure wearing hair. Figure shown here also wearing a standard cape (can be found on our website)
We also have the Zelda cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
Ideal replacement for your Luke Skywalker Poncho
Turn your Mindflayer into the Emperor with this combination of three capes which make a stunning accessory to your figure.
Dual colour cherry red/black standard cape. Will fit a standard Lego minifigure. Ideal for your Moff Gideon minifig.
Made from polycotton. Will fit a minifigure with standard legs.
Made from polycotton. Will fit a minifigure with standard legs.
Printed pauldron with the Neyo emblem; made from polycotton. Will fit a standard Lego minifigure.
Alternative custom cape for Ra’s Al Ghul. Can also use our standard cape and black panther cowl in dark green to replicate the original figure’s capes.
Colour pictured: Dark Green
Made from polycotton. Will fit a minifigure with standard legs.
Please note this cape was previously listed as ‘Count’
6 capes for your Republic Juggernaut set figures:
1x Dark Brown Standard Cape (Ki-Adi-Mundi)
1x Commander Bacara Pauldron
4x Cherry Red V Front Kamas (1x Commander Bacara, 3x Galactic Marine)
Will fit a standard LEGO minifigure.
Also sold separately. 
Made from suedette (100% polyester). Will fit a Lego minifigure.
Printed sandtrooper pauldron. Will fit a standard Lego minifigure.
One side is suede and the other is polycotton. Will fit a minifigure with standard legs.
Engraved with pocket and button feature on the inside of the coat.
Made from polycotton. Will fit a minifigure with short legs and standard legs.
Made from polycotton. Will fit a minifigure with standard or short legs.
Colour pictured: Red
Upgrade your Superman minifig with our custom printed Superman cape.
Available in ’2025’ and ‘Comics’ versions.
The tartan is within the ribbon so each kilt will be slightly different; the pattern will be identical horizontally, however the vertical pattern will vary.
Made from polycotton. Will fit a minifigure with regular legs.
With a hole in the cape for the tail!
Made from polyester ribbon.
Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Made from polyester ribbon. Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Plain version of our custom Bane trench coat.
Made from polycotton. Will fit a minifigure with long legs. Colour pictured: Dark Tan
Made from polycotton. Will fit a minifigure with long legs. Colour pictured: Bluish Grey
Made from polycotton. Will fit a minifigure with long legs.
Made from polycotton. Will fit a minifigure with short or long legs.
Made from polycotton. Will fit a minifigure with standard legs. Random stars with plain black on reverse.
We also have the Link cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
- 1