Custom
Please note we are only able to ship these to: UK, USA (Mainland), Canada, Australia & New Zealand
Grievous Buildable (Suedette. )
NEW & IMPROVED Large Grievous Cape for your Buildable LEGO Grievous
Featuring
- Softer fabric- allowing the cape to fall freely over the figure
- Longer- covers more of the back of the figure than our previous design
Only 1 per customer. If you would like to order more 2+ please email us at sales@capes4minifigs.com
Please note we are only able to ship these to: UK, USA (Mainland), Canada, Australia & New Zealand
COMPLETE D&D Set (Polycotton. )
We have designed a full range of capes to enhance your D&D minifigs.
Included in this set:
Mind Flayer - 3e
Mind Flayer - 5e
Mind Flayer - Emperor set of 3 printed
Strahd - Cherry Red/Black version
Strahd - Dark Blue version
Halfling Druid - Short leg version
Halfling Druid - Standard leg length version
Lady of Pain
Teifling
Dragonborn Paladin
Tasha printed cape
Szass cape and cowl
Included in this set:
Mind Flayer - 3e
Mind Flayer - 5e
Mind Flayer - Emperor set of 3 printed
Strahd - Cherry Red/Black version
Strahd - Dark Blue version
Halfling Druid - Short leg version
Halfling Druid - Standard leg length version
Lady of Pain
Teifling
Dragonborn Paladin
Tasha printed cape
Szass cape and cowl
501st Complete Set (Polycotton. )
4 Printed 501st Double Pauldrons and 4 501st Printed Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
COMPLETE Minecraft Set (Polyester. )
We have designed a range of capes to enhance your Minecraft minifigs.
Total set worth £11.78 (when purchased individually)
CAPES ONLY. Minifigs NOT included.
Included in this set:
1x Migrator Printed Cape
1x Creeper (MineCon 2011) Printed Cape
1x Pair of Printed Elytra Wings
1x Shouldered Stray Printed Cape
1x Stray (no shoulders) Printed Cape
2x Stray (unprinted) Capes
Mind Flayer Emperor (Polycotton. )
Custom printed cape for your D&D Mind Flayer minifigure.
Turn your Mindflayer into the Emperor with this combination of three capes which make a stunning accessory to your figure.
Turn your Mindflayer into the Emperor with this combination of three capes which make a stunning accessory to your figure.
Link Cape with Hood (Polyester. )
Printed cape designed to enhance your Legend Of Zelda Link minifig.
This comes with two capes, a printed cloak and a printed hood piece.
We also have the Zelda cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
We also have the Zelda cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
Zelda Cape with Hood (Polyester. )
Printed cape designed to enhance your Legend Of Zelda minifig.
This comes with two capes, a printed cloak and a printed hood piece.
We also have the Link cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
We also have the Link cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
Elytra (Polyester.)
Pair of custom Minecraft Elytra printed wings. Can be positioned to be ‘closed’ or ‘open’.
Tasha (Iggwilv) (Polycotton. )
Custom printed cape for your D&D Tasha (Witch-Queen Iggwilv) minifigure.
General Grievous 2014-2020 (Polycotton. )
This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.
This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.
Chancellor Palpatine Robe (Polyester. )
Printed Palpatine Robe. Printed design on the front all red on the other side. Will fit a standard Lego minifigure. Ideal for the Lego Starwars Palpatine minifigure
Printed Palpatine Robe. Printed design on the front all red on the other side. Will fit a standard Lego minifigure. Ideal for the Lego Starwars Palpatine minifigure
Shouldered Stray (printed) (Polyester.)
Custom Minecraft Shouldered Stray printed cape. Supplied flat with score marks to assist with achieving the desired look.
General Grievous (short) (Polycotton. )
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
Han Solo (Polyester. )
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.
Lando Patterned (Polycotton. )
Printed patterned Lando cape. Gold pattern on one side and medium blue on the other. Ideal upgrade for your Lando minifig.
Echo Bad Batch Kama (Polycotton. )
New style printed kama for your Echo Bad Batch figure.
The kama design has been adapted to ensure full coverage over the printed kama on your Bad Batch Minifig.
The kama design has been adapted to ensure full coverage over the printed kama on your Bad Batch Minifig.
Rainbow Standard Cape (Polyester. )
Pride Month Special
Printed rainbow standard cape. Fits regular sized Lego minifigs
Kingdom Horse Blanket (Polyester. )
Bespoke design for your Lego Horse created in the iconic Kingdom colours. These are available in Blue, Red or Gold.
Luke Poncho (Suedette. )
Made from suedette (100% polyester). Will fit a Lego minifigure.
Ideal replacement for your Luke Skywalker Poncho
Ideal replacement for your Luke Skywalker Poncho
501st Double Pauldrons (Polycotton. )
Printed Double Sided 501st Pauldrons (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed kamas.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
501st Kamas (Polyester. )
Printed 501st Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed double pauldrons.
Please note these kamas are designed to wrap further around the minifigure's legs to ensure the decal print is covered. Our other printed trim kamas (including blue trim) do not wrap around as far.
Will fit a standard Lego minifigure.
Stray (printed) (Polyester.)
Custom Minecraft Stray printed cape (no shoulders). Supplied flat with score marks to assist with achieving the desired look.
Bane Trench (Polycotton. )
One side is suede and the other is polycotton. Will fit a minifigure with standard legs. Pocket and button feature on the inside of the coat.
Bane trench pictured is dark tan.
Pauldron - Galactic Republic (Polycotton. )
Printed coloured Pauldron with Galactic Republic emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Imperial Crest (Polycotton. )
Printed coloured Pauldron with the Imperial Crest emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Senate Guard (Polycotton. )
Printed coloured Pauldron with the Imperial Crest emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Galactic Senate Guard (Polycotton. )
Printed coloured Pauldron made from polycotton backed in black with Galactic Senate Guard Emblem. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Wolfpack (Polycotton. )
Printed coloured Pauldron with Wolfpack emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Sith First Order (Polycotton. )
Printed coloured Pauldron with Sith First Order Hybrid emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Neyo (Polycotton. )
Printed coloured Pauldron with the Neyo emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Can be matched with a Printed Dark Red Kama
Can be matched with a Printed Dark Red Kama
Kama (Galactic Republic with stripe) (Polyester. )
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Kama (Galactic Republic with zigzag) (Polyester. )
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment.
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment.
Kama (coloured zigzag) (Polyester. )
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Dual Yellow/Black (Polycotton. )
Choose from our selection of cape designs which are printed yellow with a black reverse.
These capes will fit your Lego standard leg minifigfure.If there is a cape design that you would like but it is not listed here, please do get in touch.
Royal Guard Wrap Robe (Suedette. )
Made from suedette (100% polyester). Will fit a Lego minifigure.
Made from suedette (100% polyester). Will fit a Lego minifigure.
Sandtrooper Pauldron (Polyester. )
Printed sandtrooper pauldron. Will fit a standard Lego minifigure.
Lando Collar Blue (Polycotton. )
Printed coloured Lando Cape. Colour shape on black one side and all black on the other side. Will fit a standard Lego minifigure. Ideal replacement for The Lego Starwars Lando minifigure
Lando Collar Gold Patterned (Polycotton. )
Printed coloured Lando Cape. Patterned shape on black one side and all black on the other side. Will fit a standard Lego minifigure. Ideal replacement for The Lego Starwars Lando minifigure
Short Bane Jacket (Polycotton. )
One side is suede and the other is polycotton. Will fit a minifigure with standard legs.
Engraved with pocket and button feature on the inside of the coat.![]()
One side is suede and the other is polycotton. Will fit a minifigure with standard legs.
Engraved with pocket and button feature on the inside of the coat.
Mind Flayer 3e (Polycotton. )
Custom cape for your D&D Mind Flayer minifigure (3rd edition).
Mind Flayer 5e (Polycotton. )
Custom cape for your D&D Mind Flayer minifigure (5th edition). Cherry red/black (dual colour).
Lady of Pain (All Colours) (Polycotton. )
Custom cape for your D&D Lady of Pain minifigure in all colours.
King Collar (Suedette. )
Custom replacement 3 hole suedette collar for your King minifigure.
Will fit a standard Lego minifigure.
Please note they are cut from patterned printed fabric so each collar will be different.
Will fit a standard Lego minifigure.
Please note they are cut from patterned printed fabric so each collar will be different.
Tiefling (Polycotton. )
Custom cape for your D&D Tiefling minifigure in plum/black (dual colour).
With a hole in the cape for the tail!
With a hole in the cape for the tail!
Royal Guard Over Head Robe (Suedette. )
Made from suedette (100% polyester). Will fit a Lego minifigure.
Ahsoka (Polycotton. )
Made from polycotton.
Available in dark grey (to match sw1300) and light grey (to match white Ahsoka minifig- sw1354).
For video instructions for help putting on this cape please click here
Moff Gideon (Polycotton. )
Dual colour cherry red/black standard cape. Will fit a standard Lego minifigure. Ideal for your Moff Gideon minifig.
Dual Colour Batman (Polycotton. )
Choice of either dark blue or blue with black on the back.
Cut to a standard batman cape.
Made from polycotton. Will fit a minifigure with standard legs.
Cloak (4 Hole) (Polycotton. )
Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Cloak (5 Hole) (Polycotton. )
Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Batman Cloak (5 Hole) (Polycotton. )
Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Batman Cloak (Polycotton. )
Made from polycotton. Will fit a minifigure with standard legs.
Made from polycotton. Will fit a minifigure with standard legs.
Overshoulder Bite (Polycotton. )
Made from polycotton. Will fit a minifigure with standard legs.
Made from polycotton. Will fit a minifigure with standard legs.
Count (Curved) (Polycotton. )
Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Vampire minifigure from Lego series 2. We also offer these with a different colour each side plus we also make a version with a jagged bottom which we call the vampire.
Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Vampire minifigure from Lego series 2. We also offer these with a different colour each side plus we also make a version with a jagged bottom which we call the vampire.
Trench (Green Camo) (Polyester. )
Made from polyester ribbon. Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Made from polyester ribbon. Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Trench (Brown Camo) (Polyester. )
Made from polyester ribbon.
Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Made from polyester ribbon.
Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Trench Coat (Long) (Polycotton. )
Made from polycotton. Will fit a minifigure with long legs.
Made from polycotton. Will fit a minifigure with long legs.
Overshoulder Plain (Polycotton. )
Made from polycotton. Will fit a minifigure with standard legs.
Made from polycotton. Will fit a minifigure with standard legs.
Batman Bachelor (Polycotton. )
The batman cape has white suedette on one side and plain silver on the other. Will fit a minifigure with standard legs.
The batman cape has white suedette on one side and plain silver on the other. Will fit a minifigure with standard legs.
Short Overshoulder plain (Polycotton. )
Made from polycotton. Will fit a minifigure with standard or short legs.
Made from polycotton. Will fit a minifigure with standard or short legs.
Kilt Skirt - Plain (Polycotton. )
Made from polycotton. Skirt with the same cut and shape as our kilts but just in plain polycotton fabric. Will fit a minifigure with standard legs.
Made from polycotton. Skirt with the same cut and shape as our kilts but just in plain polycotton fabric. Will fit a minifigure with standard legs.
Tattered Cloak (Witch King) (Suedette. )
Made from polycotton. Will fit a minifigure with regular legs.
Made from polycotton. Will fit a minifigure with regular legs.
Large Hood (Fits Hair) (Polycotton. )
Made from polycotton. Will fit a standard minifigure.
Long awaited cape design - we have managed to create a hood which fits over a figure wearing hair. Figure shown here also wearing a standard cape (can be found on our website)
Made from polycotton. Will fit a standard minifigure.
Long awaited cape design - we have managed to create a hood which fits over a figure wearing hair. Figure shown here also wearing a standard cape (can be found on our website)
Dragonborn Paladin (Polycotton. )
Custom cape for your D&D Dragonborn Paladin minifigure in dark blue.
Designed to fit around the character's shoulder pieces.
Designed to fit around the character's shoulder pieces.