Starwars

A twist on the Bionicle Kylo Ren cape with the addition of a hood. We have designed a version of fabric that uses the existing Lego cross clasp to hold it at the back pictured below. This helps it to create the hoodie shape.

Made from suedette (100% polyester). This is a pair of capes to fit a Lego Range Trooper. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.

Made from brown polyester suedette. Will fit a Lego buildable Obi Wan.

Made from black polyester suedette. Will fit a Lego buildable Darth Vader. Your original cape would have an extra hole; it appears that Lego used the same cut as obi wan, but its not needed. Please get in touch if you would the obi wan style version in black.

Made from suedette (100% polyester). This is a pair of capes to fit a Lego Range Trooper. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.

Made from suedette (100% polyester). Replacement for Darth Vader 75534-1cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.

Made from suedette (100% polyester). Replacement for Darth Vader 75534 main cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.

Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.

Made from polycotton.

This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.

Printed Palpatine Robe. Printed design on the front all red on the other side. Will fit a standard Lego minifigure. Ideal for the Lego Starwars Palpatine minifigure

This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.

This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.

Made from suedette (100% polyester). Replacement for Darth Maul 75537 cape. The original Darth Maul came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.

Made from suedette (100% polyester). A custom cape. We can offer a range of colours should you wish to adapt your figure.

Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.

Made from suedette (100% polyester). This cape to fit a Lego Range Trooper. Its just the skirt. We also sell sets with the tops. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.

Made from suedette (100% polyester). This cape to fit a Lego Range Trooper. Its just the top. We also sell sets with the skirts. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.

Printed coloured Lando Cape. Gold pattern on one side and medium blue on the other. Will fit a standard Lego minifigure. Ideal replacement for The Lego Starwars Lando minifigure

Made from suedette (100% polyester). Will fit a Lego minifigure.
Ideal replacement for your Luke Skywalker Poncho

Printed coloured Pauldron made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.

Printed coloured Pauldron with Galactic Republic emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed coloured Pauldron with the Imperial Crest emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed coloured Pauldron with the Imperial Crest emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed coloured Pauldron made from polycotton backed in black with Galactic Senate Guard Emblem. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed coloured Pauldron with Wolfpack emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed coloured Pauldron with Sith First Order Hybrid emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed coloured Rex Pauldron made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Printed coloured Pauldron with the Neyo emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Can be matched with a Printed Dark Red Kama

Printed fabric backed with dark grey polycotton. Will fit a standard Lego minifigure.

Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.

Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment, more colours to follow.

Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment, more colours to follow.

Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.

New style printed kama for your Echo Bad Batch figure.
This is printed with the red and black design on one side and printed black on the other.
This makes the fabric thinner.
The kama design has been adapted to ensure full coverage over the printed kama on your Bad Batch Minifig.

Choose from our selection of cape designs which are printed yellow with a black reverse.
These capes will fit your Lego standard leg minifigfure. If there is a cape design that you would like but it is not listed here, please do get in touch.

New style printed kama for Echo 501st cutsom figure.
This is printed with the blue design on one side and white on the other.
New slightly thinner fabric allows the kama to wrap around your figure with ease.

Made from suedette (100% polyester). Will fit a Lego minifigure.

Printed coloured Lando Cape. Colour shape on black one side and all black on the other side. Will fit a standard Lego minifigure. Ideal replacement for The Lego Starwars Lando minifigure

Printed coloured Lando Cape. Patterned shape on black one side and all black on the other side. Will fit a standard Lego minifigure. Ideal replacement for The Lego Starwars Lando minifigure

Made from suedette (100% polyester). Will fit a Lego minifigure.

Made from polycotton. Will fit a minifigure with short legs. Ideal replacement for Yoda minifigure.

Dual colour cherry red/black standard cape. Will fit a standard Lego minifigure. Ideal for your Moff Gideon minifig.

Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.

Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.

Made from polycotton. Will fit a minifigure with standard legs.

Made from polycotton. Will fit a minifigure with long legs. Ideal replacement for Lego Lando minifigure.

Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Lego Mandalorian minifigures.

Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Lego Obi-wan minifigures.

This is a plain, unprinted version of the Han Solo cape, made from polycotton and is available in all our polycotton colours. Will fit a minifigure with standard legs.

Made from polycotton. Will fit a minifigure with standard legs.
Suitable for Mateo or Dr Liet-Kynes

Made from polycotton. Will fit a standard minifigure with long legs.

Made from polycotton. Will fit a standard minifigure.
Long awaited cape design - we have managed to create a hood which fits over a figure wearing hair. Figure shown here also wearing a standard cape (can be found on our website)

Made from polycotton. Will fit a standard minifigure with long legs. Suitable for Princess Leia (Ewok Village) figure.

Made from polycotton. Will fit a minifigure with short legs. Ideal replacement for Yoda minifigure.

Made from polycotton. Will fit a minifigure with long or short legs. Ideal replacement for Kylo Ren Tattered Edges minifigure.

Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Boba Fett minifigures.

Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Darth Malgus minifigures.

Made from suedette (100% polyester). Will fit a Lego minifigure. Ideal replacement for Starwars Jinn minifigure.

Made from suedette (100% polyester). Will fit a Lego minifigure. Ideal replacement for Starwars Jyn Erso minifigure.

Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Lego Mandalorian minifigures.

Made from suedette (100% polyester). Will fit a Lego minifigure.

Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.

Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Palpatine