Starwars
Suitable for Mateo or Dr Liet-Kynes
4 Printed 501st Double Pauldrons and 4 501st Printed Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
Printed Double Sided 501st Pauldrons (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed kamas.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
Printed 501st Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed double pauldrons.
Please note these kamas are designed to wrap further around the minifigure's legs to ensure the decal print is covered. Our other printed trim kamas (including blue trim) do not wrap around as far.
Will fit a standard Lego minifigure.
Made from polycotton.
Available in dark grey (to match sw1300) and light grey (to match white Ahsoka minifig- sw1354).
For video instructions for help putting on this cape please click here
Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Burgundy armour shoulder pictured. Pair with our black kama for the complete look.
Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Boba Fett minifigures.
Printed Palpatine Robe. Printed design on the front all red on the other side. Will fit a standard Lego minifigure. Ideal for the Lego Starwars Palpatine minifigure
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Made from polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Darth Malgus minifigures.
Made from suedette (100% polyester). Replacement for Darth Maul 75537 cape. The original Darth Maul came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Made from black polyester suedette. Will fit a Lego buildable Darth Vader. Your original cape would have an extra hole; it appears that Lego used the same cut as obi wan, but its not needed. Please get in touch if you would the obi wan style version in black.
Made from suedette (100% polyester). Replacement for Darth Vader 75534 main cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). Replacement for Darth Vader 75534-1cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Choose from our selection of cape designs which are printed yellow with a black reverse.
These capes will fit your Lego standard leg minifigfure.If there is a cape design that you would like but it is not listed here, please do get in touch.
The kama design has been adapted to ensure full coverage over the printed kama on your Bad Batch Minifig.
Made from suedette (100% polyester). Replacement for Elite Praetorian Guard. The original Elite Praetorian Guard came with a red cape. However, we can offer a range of colours should you wish to adapt your figure.
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.
NEW & IMPROVED Large Grievous Cape for your Buildable LEGO Grievous
Featuring
- Softer fabric- allowing the cape to fall freely over the figure
- Longer- covers more of the back of the figure than our previous design
Only 1 per customer. If you would like to order more 2+ please email us at sales@capes4minifigs.com
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.
Made from polycotton. Will fit a standard minifigure. Goes well with standard capes as shown on the Lego model.
Made from suedette (100% polyester). Will fit a Lego minifigure.
Made from suedette (100% polyester). Will fit a Lego minifigure.
Ideal replacement for your Starwars Jinn minifigure (colour match: dark tan)
Ideal replacement for your Starwars Jyn Erso minifigure. Made from suedette.
Made from polycotton. Will fit a standard Lego minifigure.Ideal replacement for Starwars Troopers.
Pair with our burgundy armour shoulder to complete the look.
Printed fabric with coloured edge. Ideal for Starwars Troopers.
Will fit a standard Lego minifigure.
Blue, Orange, Yellow, Red and Dark Grey available.
Please note these kamas do not wrap around the legs as far as our specific 501st kamas and therefore do not completely cover leg decals.
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment.
Made from polycotton. Will fit a standard minifigure with long legs.
Made from suedette (100% polyester). A custom cape. We can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Range Trooper. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.
Made from polycotton. Will fit a minifigure with long or short legs. Ideal replacement for Kylo Ren Tattered Edges minifigure.
Made from polycotton. Will fit a minifigure with long legs. Ideal replacement for Lego Lando minifigure.
Standard Lego compatible cape for standard leg mini figure. Includes one standard cape and one cowl collar, both with azure colour one side and black on reverse.
Printed patterned Lando cape. Gold pattern on one side and medium blue on the other. Ideal upgrade for your Lando minifig.
Made from polycotton. Will fit a standard minifigure.
Long awaited cape design - we have managed to create a hood which fits over a figure wearing hair. Figure shown here also wearing a standard cape (can be found on our website)
Ideal replacement for your Luke Skywalker Poncho
Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for your Lego MagnaGuard (colour: light tan).
Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Lego Mandalorian minifigures.
Made from brown polyester suedette. Will fit a Lego buildable Obi Wan.
