Custom
Link Cape with hood (Polyester)
Printed cape designed to enhance your Legend Of Zelda Link minifig.
This comes with two capes, a printed cloak and a printed hood piece.
We also have the Zelda cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
We also have the Zelda cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.

Zelda Cape with hood (Polyester)
Printed cape designed to enhance your Legend Of Zelda minifig.
This comes with two capes, a printed cloak and a printed hood piece.
We also have the Link cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
We also have the Link cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.

General Grievous 2014-2020 (Polycotton)

This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.


This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.
General Grievous (short) (Polycotton)
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
Han Solo (Polycotton)
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.


Rainbow Standard Cape (Polycotton)
Pride Month Special
Printed rainbow standard cape. Fits regular sized Lego minifigs

Luke Poncho (Suedette)
Made from suedette (100% polyester). Will fit a Lego minifigure.
Ideal replacement for your Luke Skywalker Poncho

Ideal replacement for your Luke Skywalker Poncho

Bane Trench (Polycotton)
One side is suede and the other is polycotton. Will fit a minifigure with standard legs. Pocket and button feature on the inside of the coat.
Bane trench pictured is dark tan.
Yellow cape with Black reverse (Polycotton)
Choose from our selection of cape designs which are printed yellow with a black reverse.
These capes will fit your Lego standard leg minifigfure.If there is a cape design that you would like but it is not listed here, please do get in touch.
Short Bane Jacket (Polycotton)


One side is suede and the other is polycotton. Will fit a minifigure with standard legs.
Engraved with pocket and button feature on the inside of the coat.



One side is suede and the other is polycotton. Will fit a minifigure with standard legs.
Engraved with pocket and button feature on the inside of the coat.
King Collar (Polycotton)
Custom replacement 3 hole suedette collar for your King minifigure.
Will fit a standard Lego minifigure.
Please note they are cut from patterned printed fabric so each collar will be different.
Will fit a standard Lego minifigure.
Please note they are cut from patterned printed fabric so each collar will be different.

Royal Guard Over Head Robe (Suedette)
Made from suedette (100% polyester). Will fit a Lego minifigure.



Ashoka (Polycotton)
Made from polycotton.
Available in dark grey (to match sw1300) and light grey (to match white Ashoka minifig- sw1354).
For video instructions for help putting on this cape please click here
Cloak (4 hole) (Polycotton)
Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.

Designed to wrap further around the figure.
Will fit a minifigure with standard legs.

Cloak (5 hole) (Polycotton)
Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.

Designed to wrap further around the figure.
Will fit a minifigure with standard legs.

Batman Cloak (5 hole) (Polycotton)
Made from polycotton.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.
Designed to wrap further around the figure.
Will fit a minifigure with standard legs.

Batman Cloak (Polycotton)

Made from polycotton. Will fit a minifigure with standard legs.


Made from polycotton. Will fit a minifigure with standard legs.
Overshoulder bite (Polycotton)

Made from polycotton. Will fit a minifigure with standard legs.


Made from polycotton. Will fit a minifigure with standard legs.
Count (Curved) (Polycotton)


Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Vampire minifigure from Lego series 2. We also offer these with a different colour each side plus we also make a version with a jagged bottom which we call the vampire.



Made from polycotton. Will fit a minifigure with standard legs. Ideal replacement for Vampire minifigure from Lego series 2. We also offer these with a different colour each side plus we also make a version with a jagged bottom which we call the vampire.
Trench (Green Camo) (Polyester)


Made from polyester ribbon. Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.



Made from polyester ribbon. Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Trench (Brown Camo) (Polyester)

Made from polyester ribbon.
Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.

Made from polyester ribbon.
Will fit a minifigure with standard or short legs. Random camo ribbed pattern on each one.
Trench Coat (Long) (Polycotton)


Made from polycotton. Will fit a minifigure with long legs.



Made from polycotton. Will fit a minifigure with long legs.
Overshoulder Plain (Polycotton)

Made from polycotton. Will fit a minifigure with standard legs.

Made from polycotton. Will fit a minifigure with standard legs.
Batman Bachelor (Polycotton)
The batman cape has white suedette on one side and plain silver on the other. Will fit a minifigure with standard legs.

The batman cape has white suedette on one side and plain silver on the other. Will fit a minifigure with standard legs.
Short Overshoulder plain (Polycotton)
Made from polycotton. Will fit a minifigure with standard or short legs.
Made from polycotton. Will fit a minifigure with standard or short legs.
Tattered Cloak (Witch King) (Suedette)
Made from polycotton. Will fit a minifigure with regular legs.
Made from polycotton. Will fit a minifigure with regular legs.

Large Hood - fits over hair (Polycotton)
Made from polycotton. Will fit a standard minifigure.
Long awaited cape design - we have managed to create a hood which fits over a figure wearing hair. Figure shown here also wearing a standard cape (can be found on our website)


Made from polycotton. Will fit a standard minifigure.
Long awaited cape design - we have managed to create a hood which fits over a figure wearing hair. Figure shown here also wearing a standard cape (can be found on our website)
Dragonborn - all colours (Polycotton)
Made from polycotton. Will fit a minifigure with standard legs.
PLEASE NOTE: This cape is the same as our Knight Armour cape. We have listed the cape under different names to assist different customers in finding this armour shoulder pad compatible design.

PLEASE NOTE: This cape is the same as our Knight Armour cape. We have listed the cape under different names to assist different customers in finding this armour shoulder pad compatible design.

Knight Armour Cape (Polycotton)
Designed to be able to be worn with armour shoulder pads.
Made from polycotton. Will fit a minifigure with standard legs.
PLEASE NOTE: This cape is the same as our Dragonborn cape. We have listed the cape under different names to assist different customers in finding this armour shoulder pad compatible design.

Made from polycotton. Will fit a minifigure with standard legs.
PLEASE NOTE: This cape is the same as our Dragonborn cape. We have listed the cape under different names to assist different customers in finding this armour shoulder pad compatible design.

Trench Coat (Short) (Polycotton)


Made from polycotton. Will fit a minifigure with short legs.



Made from polycotton. Will fit a minifigure with short legs.
White stars on black (Polycotton)

Made from polycotton. Will fit a minifigure with standard legs. Random stars with plain black on reverse.

Made from polycotton. Will fit a minifigure with standard legs. Random stars with plain black on reverse.
Trench Coat (Long Rounded) (Polycotton)

Made from polycotton. Will fit a minifigure with long legs.



Made from polycotton. Will fit a minifigure with long legs.
Hood (Polycotton)

Made from polycotton. Will fit a standard minifigure. Goes well with standard capes as shown on the Lego model.


Made from polycotton. Will fit a standard minifigure. Goes well with standard capes as shown on the Lego model.


Short Jacket (Polycotton)
Made from polycotton. Will fit a minifigure with short legs and standard legs.
Made from polycotton. Will fit a minifigure with short legs and standard legs.
- 1