All
Please note we are only able to ship these to: UK, USA (Mainland), Canada, Australia & New Zealand
Grievous Buildable (Suedette. )
NEW & IMPROVED Large Grievous Cape for your Buildable LEGO Grievous
Featuring
- Softer fabric- allowing the cape to fall freely over the figure
- Longer- covers more of the back of the figure than our previous design
Only 1 per customer. If you would like to order more 2+ please email us at sales@capes4minifigs.com
Please note we are only able to ship these to: UK, USA (Mainland), Canada, Australia & New Zealand
COMPLETE D&D Set (Polycotton. )
We have designed a full range of capes to enhance your D&D minifigs.
Included in this set:
Mind Flayer - 3e
Mind Flayer - 5e
Mind Flayer - Emperor set of 3 printed
Strahd - Cherry Red/Black version
Strahd - Dark Blue version
Halfling Druid - Short leg version
Halfling Druid - Standard leg length version
Lady of Pain
Teifling
Dragonborn Paladin
Tasha printed cape
Szass cape and cowl
Included in this set:
Mind Flayer - 3e
Mind Flayer - 5e
Mind Flayer - Emperor set of 3 printed
Strahd - Cherry Red/Black version
Strahd - Dark Blue version
Halfling Druid - Short leg version
Halfling Druid - Standard leg length version
Lady of Pain
Teifling
Dragonborn Paladin
Tasha printed cape
Szass cape and cowl
Queen Anne's Revenge Sail Set (Polycotton. )
Made from polycotton.
One 18x12, two Mizzen sails, two 17 x 20, four 27 x 17.
This is an ideal replacement for all the sails on your Queen Anne's revenge.
Black Pearl Sail Set (Polycotton. )
Made from polycotton.
One 18x12, Four 27x17 and two 17x20 sails
This is an ideal replacement for all the sails on your Black Pearl ship.
501st Complete Set (Polycotton. )
4 Printed 501st Double Pauldrons and 4 501st Printed Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
Silent Mary Sails SET (Polycotton. )
Suitable as a complete set of sails for the Silent Mary ship set 71042. This set contains 3 of the longer sails and 5 of the shorter sails Made from polycotton, the dark tan is a close match in colour to the original sails, however these are made from a different fabric to the Lego version.
Suitable as a complete set of sails for the Silent Mary ship set 71042. This set contains 3 of the longer sails and 5 of the shorter sails Made from polycotton, the dark tan is a close match in colour to the original sails, however these are made from a different fabric to the Lego version.
Imperial Flag ship sails (Polycotton. )
Made from polycotton.
One 25 x 25, one 15 x 22 with 8 holes and one 18 x 25
This is an ideal replacement for all the sails on your imperial flagship.
Please note, these are plain and have not design on the front, however they do come in all our usual polycotton colours.
Vezon / Karzahni (Suedette. )
Made from suedette (100% polyester). Ideal replacement for Bionicle Vezon.
Watch a Instagram customer review of our vezon capes:
Watch a Instagram customer review of our vezon capes:
View this post on Instagram
Kylo Ren Cape, Hood & Waist Set (Suedette. )
A twist on the Bionicle Kylo Ren cape with the addition of a hood. We have designed a version of fabric that uses the existing Lego cross clasp to hold it at the back pictured below. This helps it to create the hoodie shape.
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Range Trooper. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Range Trooper. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Mind Flayer Emperor (Polycotton. )
Custom printed cape for your D&D Mind Flayer minifigure.
Turn your Mindflayer into the Emperor with this combination of three capes which make a stunning accessory to your figure.
Turn your Mindflayer into the Emperor with this combination of three capes which make a stunning accessory to your figure.
Sir Fangar (Suedette. )
Made from suedette (100% polyester). Ideal replacement for Bionicle Vezon.
Lord Makuta Staff & Skirt (Polycotton. )
Made from polycotton. if you are looking for a replacement then choose red. However, we now offer them in lots of other colours as well. The skirt is 12.1cm tall and the staff is 20.8cm tall.
Made from polycotton. if you are looking for a replacement then choose red. However, we now offer them in lots of other colours as well. The skirt is 12.1cm tall and the staff is 20.8cm tall.
Large Zurg (Black & Red) (Polycotton. )
Made from polycotton. Will fit a the large buildable zurg. NOT for small minifigures. Will be posted folded; you would need to fold it at the same point to fit it to your large Zurg.
Made from polycotton. Will fit a the large buildable zurg. NOT for small minifigures. Will be posted folded; you would need to fold it at the same point to fit it to your large Zurg.
Link Cape with Hood (Polyester. )
Printed cape designed to enhance your Legend Of Zelda Link minifig.
This comes with two capes, a printed cloak and a printed hood piece.
We also have the Zelda cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
We also have the Zelda cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
Zelda Cape with Hood (Polyester. )
Printed cape designed to enhance your Legend Of Zelda minifig.
This comes with two capes, a printed cloak and a printed hood piece.
We also have the Link cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
We also have the Link cape to go as a pair.
PLEASE NOTE: The hood is not designed to fit over the figures head. It is designed to full down the back of the figure.
Obi Wan (Buildable) (Suedette. )
Made from brown polyester suedette. Will fit a Lego buildable Obi Wan.
Made from brown polyester suedette. Will fit a Lego buildable Obi Wan.
Darth Vader (Buildable) (Suedette. )
Made from black polyester suedette. Will fit a Lego buildable Darth Vader. Your original cape would have an extra hole; it appears that Lego used the same cut as obi wan, but its not needed. Please get in touch if you would the obi wan style version in black.
Made from black polyester suedette. Will fit a Lego buildable Darth Vader. Your original cape would have an extra hole; it appears that Lego used the same cut as obi wan, but its not needed. Please get in touch if you would the obi wan style version in black.
Range Trooper (Buildable) Set (Suedette. )
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Range Trooper. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Range Trooper. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Lord Vladek (Large) (Suedette. )
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Knights Kingdom Lord Vladek Character. The original came with a dark red cape. However, we offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Knights Kingdom Lord Vladek Character. The original came with a dark red cape. However, we offer a range of colours should you wish to adapt your figure.
King Mathias (Large) (Suedette. )
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Knights Kingdom King Mathias Character. The original came with a grey cape. However, we offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). This is a pair of capes to fit a Lego Knights Kingdom King Mathias Character. The original came with a grey cape. However, we offer a range of colours should you wish to adapt your figure.
Darth Vader Skirt (Buildable) (Suedette. )
Made from suedette (100% polyester). Replacement for Darth Vader 75534-1cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). Replacement for Darth Vader 75534-1cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Darth Vader Main (Buildable) (Suedette. )
Made from suedette (100% polyester). Replacement for Darth Vader 75534 main cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). Replacement for Darth Vader 75534 main cape. The original figure came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Kylo Ren Main (Buildable) (Suedette. )
Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.
Carousel Tops (2017) (Polycotton. )
Made from polycotton. A 2017 Lego carousel requires 6 of these (see photo). You could purchase 3 and alternate them with your originals (like photo).
Made from polycotton. A 2017 Lego carousel requires 6 of these (see photo). You could purchase 3 and alternate them with your originals (like photo).
Carousel Tops (2009) (Polycotton. )
Made from polycotton. A 2009 Lego carousel requires 8 of these.
Tasha (Iggwilv) (Polycotton. )
Custom printed cape for your D&D Tasha (Witch-Queen Iggwilv) minifigure.
Lord Makuta Staff (Polycotton. )
Made from polycotton. If you are looking for a replacement then choose red. However, we now offer them in lots of other colours as well.
The staff is 20.8cm tall.
Also available as a staff and skirt set.
Made from polycotton. If you are looking for a replacement then choose red. However, we now offer them in lots of other colours as well.
The staff is 20.8cm tall.
Also available as a staff and skirt set.
General Grievous 2014-2020 (Polycotton. )
This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.
This is a custom design longer version of the cape designed for the 2018 General Grievous minifigure. It has a printed logo on one side and burgundy fabric on the reverse. 50mm long by 42mm wide.
Chancellor Palpatine Robe (Polyester. )
Printed Palpatine Robe. Printed design on the front all red on the other side. Will fit a standard Lego minifigure. Ideal for the Lego Starwars Palpatine minifigure
Printed Palpatine Robe. Printed design on the front all red on the other side. Will fit a standard Lego minifigure. Ideal for the Lego Starwars Palpatine minifigure
Lord Makuta Skirt (Polycotton. )
Made from polycotton. If you are looking for a replacement then choose red. However, we now offer them in lots of other colours as well.
The staff is 12.1 cm tall.
Also available as a staff and skirt set.
Made from polycotton. If you are looking for a replacement then choose red. However, we now offer them in lots of other colours as well.
The staff is 12.1 cm tall.
Also available as a staff and skirt set.
General Grievous (short) (Polycotton. )
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
This is a custom design standard length version of the cape designed for the 2007 released General Grievous minifigure.
It has a printed logo on one side and burgundy fabric on the reverse.
Han Solo (Polyester. )
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.
This is a custom design works well as a replacement cape for the Han Solo Mudtrooper figure.
It has a printed design on the back of the cape and plain printed grey on the inside.
Elite Praetorian Guard (Buildable) (Suedette. )
Made from suedette (100% polyester). Replacement for Elite Praetorian Guard. The original Elite Praetorian Guard came with a red cape. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). Replacement for Elite Praetorian Guard. The original Elite Praetorian Guard came with a red cape. However, we can offer a range of colours should you wish to adapt your figure.
Darth Maul (Buildable) (Suedette. )
Made from suedette (100% polyester). Replacement for Darth Maul 75537 cape. The original Darth Maul came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). Replacement for Darth Maul 75537 cape. The original Darth Maul came with a black cape. However, we can offer a range of colours should you wish to adapt your figure.
Kylo Hood (Buildable) (Suedette. )
Made from suedette (100% polyester). A custom cape. We can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). A custom cape. We can offer a range of colours should you wish to adapt your figure.
Kylo Ren Skirt (Buildable) (Suedette. )
Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). We can offer a range of colours should you wish to adapt your figure.
Rey (Buildable) (Suedette. )
Made from suedette (100% polyester). Replacement for Rey skirt. The original was in dark tan. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). Replacement for Rey skirt. The original was in dark tan. However, we can offer a range of colours should you wish to adapt your figure.
Range Trooper Skirt (Buildable) (Suedette. )
Made from suedette (100% polyester). This cape to fit a Lego Range Trooper. Its just the skirt. We also sell sets with the tops. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). This cape to fit a Lego Range Trooper. Its just the skirt. We also sell sets with the tops. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Range Trooper Top (Buildable) (Suedette. )
Made from suedette (100% polyester). This cape to fit a Lego Range Trooper. Its just the top. We also sell sets with the skirts. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Made from suedette (100% polyester). This cape to fit a Lego Range Trooper. Its just the top. We also sell sets with the skirts. The original trooper came with white capes. However, we can offer a range of colours should you wish to adapt your figure.
Lando Patterned (Polycotton. )
Printed patterned Lando cape. Gold pattern on one side and medium blue on the other. Ideal upgrade for your Lando minifig.
Echo Bad Batch Kama (Polycotton. )
New style printed kama for your Echo Bad Batch figure.
The kama design has been adapted to ensure full coverage over the printed kama on your Bad Batch Minifig.
The kama design has been adapted to ensure full coverage over the printed kama on your Bad Batch Minifig.
Rainbow Standard Cape (Polyester. )
Pride Month Special
Printed rainbow standard cape. Fits regular sized Lego minifigs
Kingdom Horse Blanket (Polyester. )
Bespoke design for your Lego Horse created in the iconic Kingdom colours. These are available in Blue, Red or Gold.
Luke Poncho (Suedette. )
Made from suedette (100% polyester). Will fit a Lego minifigure.
Ideal replacement for your Luke Skywalker Poncho
Ideal replacement for your Luke Skywalker Poncho
501st Double Pauldrons (Polycotton. )
Printed Double Sided 501st Pauldrons (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed kamas.
Will fit a standard Lego minifigure.
PLEASE NOTE: Pauldrons supplied flat. Must be folded/shaped to achieve desired look.
501st Kamas (Polyester. )
Printed 501st Kamas (Rex, Fives, Echo, Jesse)
The perfect addition to your 501st legion minifigs. Pair with our 501st printed double pauldrons.
Please note these kamas are designed to wrap further around the minifigure's legs to ensure the decal print is covered. Our other printed trim kamas (including blue trim) do not wrap around as far.
Will fit a standard Lego minifigure.
Bane Trench (Polycotton. )
One side is suede and the other is polycotton. Will fit a minifigure with standard legs. Pocket and button feature on the inside of the coat.
Bane trench pictured is dark tan.
Printed Pauldron (Polycotton. )
Printed coloured Pauldron made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Shanghai-Chase Hood (Polycotton. )
Made from polycotton. Ideal replacement for Shanghai-Case Car (see image).
Kama (Coloured Edge) (Polycotton. )
Printed fabric with coloured edge. Ideal for Starwars Troopers.
Will fit a standard Lego minifigure.
Blue, Orange, Yellow, Red and Dark Grey available.
Please note these kamas do not wrap around the legs as far as our specific 501st kamas and therefore do not completely cover leg decals.
Printed fabric with coloured edge. Ideal for Starwars Troopers.
Will fit a standard Lego minifigure.
Blue, Orange, Yellow, Red and Dark Grey available.
Please note these kamas do not wrap around the legs as far as our specific 501st kamas and therefore do not completely cover leg decals.
Pauldron - Galactic Republic (Polycotton. )
Printed coloured Pauldron with Galactic Republic emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Imperial Crest (Polycotton. )
Printed coloured Pauldron with the Imperial Crest emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Senate Guard (Polycotton. )
Printed coloured Pauldron with the Imperial Crest emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Galactic Senate Guard (Polycotton. )
Printed coloured Pauldron made from polycotton backed in black with Galactic Senate Guard Emblem. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Wolfpack (Polycotton. )
Printed coloured Pauldron with Wolfpack emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Pauldron - Sith First Order (Polycotton. )
Printed coloured Pauldron with Sith First Order Hybrid emblem (late clone wars); made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Printed Rex Pauldron (Polycotton. )
Printed Rex pauldron made from polycotton. Will fit a standard Lego minifigure.
Available in various colours.
Available in various colours.
Pauldron - Neyo (Polycotton. )
Printed coloured Pauldron with the Neyo emblem; made from polycotton backed in black. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers.
Can be matched with a Printed Dark Red Kama
Can be matched with a Printed Dark Red Kama
Kama (Galactic Republic with stripe) (Polyester. )
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Kama (Galactic Republic with zigzag) (Polyester. )
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment.
Printed fabric with coloured edge. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Dark Orange and Dark Grey available at the moment.
Kama (coloured zigzag) (Polyester. )
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Printed fabric with coloured edge, backed with black polycotton. Will fit a standard Lego minifigure. Ideal replacement for Starwars Troopers. Blue, Orange, Yellow, Red and Dark Grey available at the moment, more colours to follow.
Dual Yellow/Black (Polycotton. )
Choose from our selection of cape designs which are printed yellow with a black reverse.
These capes will fit your Lego standard leg minifigfure.If there is a cape design that you would like but it is not listed here, please do get in touch.
Royal Guard Wrap Robe (Suedette. )
Made from suedette (100% polyester). Will fit a Lego minifigure.
Made from suedette (100% polyester). Will fit a Lego minifigure.